7 Best Instant Pot Duo Replacement Parts (November 2026)
The best instant pot duo replacement parts include the Havexerath 10Pcs Instantpot Replacement Parts for IP for Pro 80 and Duo Evo Plus 8 qt, the Pnltae 10PCS Replacement Parts for Instant Pot for Pro and Duo Evo Plus 6 qt, and the Pnltae 11PCS Replacement Parts for Instant Pot for new version Duo 6 qt.
On this page (10 sections)
- Best instant pot duo replacement parts by model and size
- Side by side: which kit fits your Duo?
- How we compared these instant pot duo replacement parts
- What size Duo do you have, and how do you check it?
- Is your Duo an old version or a new version?
- Which parts cause most Duo leaks and pressure faults?
- How do instant pot duo replacement parts compare with inner pots and cords?
- How do you fit and care for new Duo parts?
- What if the part still does not fit?
- Verdict: best instant pot duo replacement parts for your model
The best instant pot duo replacement parts for most Duo owners are the Havexerath 10Pcs set, because it covers the sealing ring, steam release valve, float valve, gaskets, anti-block shield and shroud bracket in one box. Our score weighs specs, features and buyer feedback against what you are shopping for.
Choose by model and size first, then by the parts included.
Most Duo problems start with small lid parts. A worn sealing ring lets steam escape around the rim.
A sticky float valve may not rise, so the cooker will not come to pressure. A clogged anti-block shield can also stop pressure from building.
This guide compares kits that replace those parts together, so you do not have to guess which single piece failed.
Start with our electric pressure cooker buying guide if you are comparing a whole cooker with a repair. For a wider view of seals, valves and lids, see best pressure cooker replacement parts.
Our Best Replacement Air Fryer Power Cord guide also helps when the fault is power, not pressure.
Our picks at a glance
-
1
Best for Pro 80 and Duo Evo Plus 8 qtHavexerath 10Pcs Instantpot Replacement Parts for IP
9.4/10 our score
See it on Amazon -
2
Best for Pro and Duo Evo Plus 6 qtPnltae 10PCS Replacement Parts for Instant Pot
9.3/10 our score
See it on Amazon -
3
Best for new version Duo 6 qtPnltae 11PCS Replacement Parts for Instant Pot
9.2/10 our score
See it on Amazon
- 4
Check itSPNKMJUJ 11 PCS Instant Pot Accessories
Best for Duo 5 and 6 qt - 5
Check itHavexerath 10 PCS Instantpot Replacement Parts
Best for Duo and Duo Plus 8 qt - 6
Check itPnltae Replacement Parts for Instant Pot Old
Best for old version Duo 6 qt - 7
Check itPnltae Replacement Parts for Instant Pot RIO
Best for Rio and Ultra 6 qt
Best instant pot duo replacement parts by model and size
The top picks split by cooker size and version, not by brand alone. An 8 qt kit will not fix a 6 qt lid, and an old version Duo handle may not match a new version lid.
If you need a complete lid, see our pressure cooker lid replacement guide.
Match the model code first.
Havexerath 10Pcs Instantpot Replacement Parts for IP: Best for Pro 80 and Duo Evo Plus 8 qt
- For IP Pro 80 8QT and Duo Evo Plus 8Qt
- Silicone sealing ring, steam release valve and float valve
- 3 float valve gaskets and 2 valve sealing rings
- Anti-block shield and anti-block shroud bracket
A broad 10-piece kit for 8 qt Pro and Duo Evo Plus models, with the small gaskets and rings that often cause leaks.
Pros
- Covers seal, valves and anti-block parts together
- Includes spare gaskets and sealing rings
- Formed for 8 qt Pro and Duo Evo Plus use
Cons
- Not for 6 qt Duo models
- Check valve shape against your lid
This Havexerath 10-piece kit suits owners of EVO Plus 8Qt and IP Pro 80 8QT models who need a full lid refresh rather than a single seal. It includes a food-grade silicone sealing ring, a steam release valve, a float valve, three float valve gaskets, two valve sealing rings, an anti-block shield and an anti-block shroud bracket, so the parts that most often cause leaks or a float valve that will not rise are covered together.
In daily use that means you can address a rim leak, a sticky pin and a clogged shield in one change, instead of ordering separate pieces over time. The trade-off against the other kits here is fit and coverage: it is formed for 8 qt Pro and Duo Evo Plus lids, so it will not suit standard 6 qt Duo models, and the valve shape must be checked against your own lid before you order.
Pnltae 10PCS Replacement Parts for Instant Pot: Best for Pro and Duo Evo Plus 6 qt
- For IP-Pro 60, IP-Pro Plus 60 and Duo Evo Plus 60
- 6Qt sealing ring, steam release valve and float valve
- 3 green float valve caps and 2 small O rings
- Anti-block shield
A 6 qt kit for Pro and Duo Evo Plus 6 qt models, with spare float valve caps for the small parts that wear first.
Pros
- Exact fit for three 6 qt Pro family models
- Spare float valve caps included
- Keel lines help seat the sealing ring
Cons
- Not for standard Duo 6 qt lids
- Model-specific fit must be confirmed
This Pnltae 10-piece kit suits IP-Pro 60, IP-Pro Plus 60 and Duo Evo Plus 60 owners, which puts it in a different family from standard Duo models. It includes a 6Qt sealing ring with two keel lines on the inner side to help the ring sit securely on the lid, plus a steam release valve, a float valve, three green float valve caps and two small O rings, with an anti-block shield for the vent area.
In daily use the keel lines matter because a ring that shifts on the lid will leak steam at the rim, while the spare caps give you replacements for the small parts that are easiest to lose during washing. The trade-off against the others is narrow fit: it is exact for those three 6 qt Pro family models, but it is not made for standard Duo 6 qt lids, so model and appearance must be confirmed before ordering.
Pnltae 11PCS Replacement Parts for Instant Pot: Best for new version Duo 6 qt
- For new version Duo 60 and Duo Plus 60 6QT
- Also fits Ultra 60, Duo Nova 60, Rio 6QT and Duo Gourmet 6QT
- Sealing ring, steam release valve and float valve
- Condensation collector cup and anti-block shield
An 11-piece kit for new version 6 qt Duo models, with a condensation collector cup most basic kits omit.
Pros
- Wide new version 6 qt fit
- Includes condensation collector cup
- Spare float valve caps and small seals
Cons
- Old version Duo lids may differ
- Check steam release handle shape
This Pnltae 11-piece kit suits new version Duo 60 6QT and Duo Plus 60 6QT owners, and its wider list also includes Ultra 60 6QT, Duo Nova 60 6QT, Rio 6QT, Duo Gourmet 6QT and Duo Plus Whisper Quiet 6Qt. It includes a sealing ring, a steam release valve, a float valve, three green float valve caps, an anti-block shield, two small seals and a condensation collector cup, which is a part many basic kits omit.
In daily use the cup matters because it catches water that drips from the lid at the back of the cooker, and the spare caps and seals cover the small valve parts that wear or go missing first. The trade-off against the others is generation: it is made for new version lids, so old version Duo lids may differ, especially in steam release handle shape.
SPNKMJUJ 11 PCS Instant Pot Accessories: Best for Duo 5 and 6 qt
- For Duo 5, 6 Quart IP-DUO50 and IP-DUO60
- 2 sealing rings, steam release valve and float valve
- 3 float valve gaskets and 2 valve sealing rings
- Anti-block shield and anti-blocking shroud bracket
Two sealing rings make this a strong pick for Duo 5 and 6 qt owners who want a spare ring on hand.
Pros
- Two sealing rings included
- Covers valves, gaskets and anti-block parts
- Made for Duo 5 and 6 qt sizes
Cons
- Not for 8 qt models
- Confirm Duo Plus fit for your lid
This SPNKMJUJ 11-piece kit suits Duo 5, 6 Quart IP-DUO50 and IP-DUO60 owners, with the description also listing Duo Plus 6 Quart and other Duo series models in the same size range. It includes two sealing rings, a steam release valve made from food-grade PP and steel, a float valve made from aluminum alloy, three float valve gaskets made from food-grade silicone, two valve sealing rings, an anti-block shield and an anti-blocking shroud bracket.
In daily use having two rings is a practical advantage, because you can rotate or replace a ring that holds odor or has stretched, while the mixed materials aim for sealing, durability and easy cleaning. The trade-off against the others is that it is not for 8 qt models, and Duo Plus fit should be confirmed for your specific lid generation before you order.
Havexerath 10 PCS Instantpot Replacement Parts: Best for Duo and Duo Plus 8 qt
- For Duo 8 Qt and Duo Plus 8 Quart
- Silicone sealing ring, steam release valve and float valve
- 3 float valve gaskets and 2 valve sealing rings
- Anti-block shield and anti-block shroud bracket
A 10-piece kit made for 8 qt Duo models, with spare gaskets for the float valve and steam release valve.
Pros
- Exact 8 qt Duo fit
- Spare gaskets included
- Food-grade silicone parts
Cons
- Not for Pro 80 models
- Not for 8 qt Duo models
This Havexerath 10-piece kit suits Duo 8 Qt and Duo Plus 8 Quart owners who need parts made for the larger 8 qt lid rather than a stretched smaller ring. It includes a silicone sealing ring, a steam release valve, a float valve, three float valve gaskets, two valve sealing rings, an anti-block shield and an anti-block shroud bracket, all in food-grade silicone that the maker describes as flexible, reusable and able to withstand repeated heat and pressure cycles.
In daily use that combination targets the most common failure points at once, so a loose seal, a leaking valve or a float valve that does not rise can be addressed without buying pieces one by one. The trade-off against the others is strict size fit: it is for 8 qt Duo models only, so it will not suit Pro 80 models or 6 qt Duo models.
Pnltae Replacement Parts for Instant Pot Old: Best for old version Duo 6 qt
- For old version IP-DUO50 5 Qt, IP-DUO60 6 Qt and IP-DUO Plus 60 6 Qt
- 6 Qt sealing ring, steam release handle and float valve
- Condensation collector cup and anti-block shield
- 3 green float valve gaskets and 2 small seals
Made for old version Duo lids where the steam release handle shape differs from newer models.
Pros
- Correct fit for old version Duo lids
- Includes condensation collector cup
- Spare gaskets and small seals
Cons
- Not for new version Duo models
- Handle shape must be matched
This Pnltae 11-piece kit suits old version IP-DUO50 5 Qt, IP-DUO60 6 Qt and IP-DUO Plus 60 6 Qt owners, where the steam release handle shape differs from newer Duo generations. It includes a 6Qt sealing ring with two keel lines on the inner side, a steam release handle, a float valve, three green float valve gaskets, two small seals, an anti-block shield and a condensation collector cup.
In daily use the keel lines help the ring stay fixed on the lid, and the cup catches drip water at the back of the cooker, while the spare gaskets and seals cover the small parts around the float valve that often need changing. The trade-off against the others is generation: it is not for new version Duo models, so the handle shape must be matched to your lid appearance before ordering.
Pnltae Replacement Parts for Instant Pot RIO: Best for Rio and Ultra 6 qt
- For IP-RIO 6Qt and Ultra 6QT
- Also fits new version Duo, Duo Nova, Duo Gourmet and Duo Crisp 6QT
- Sealing ring, steam release valve and float valve
- Condensation collector cup and anti-block shield
An 11-piece kit for Rio, Ultra and new version 6 qt models, with the cup and caps in one box.
Pros
- Wide 6 qt compatibility list
- Includes condensation collector cup
- Spare float valve caps included
Cons
- Not for old version Duo lids
- Confirm model and appearance before ordering
This Pnltae 11-piece kit suits IP-RIO 6Qt and Ultra 6Qt owners, and its compatibility list also includes new version Duo and Duo Plus 6 Quart, Duo Nova 6QT, Duo Gourmet 6QT, Duo Plus Whisper Quiet 6QT and Duo Crisp 11in1 Air Fryer 6QT. It includes a 6Qt sealing ring with two keel lines on the inner side, a steam release valve, a float valve, three green float valve caps, an anti-block shield, two small O rings and a condensation collector cup, all in silicone for the main seal.
In daily use the wide list makes it easier to match a Rio, Ultra or newer Duo lid, while the cup and spare caps solve drip and small-part wear in the same box. The trade-off against the others is that it is not for old version Duo lids, and model and appearance must be confirmed before ordering.
Side by side: which kit fits your Duo?
The comparison below shows fit first, because fit decides whether the parts work at all. Use your model code, size and lid shape to narrow the list, then compare included parts.
| Product | Best for | Fit | Parts | Material | Our score |
|---|---|---|---|---|---|
| Havexerath 10Pcs Instantpot Replacement Parts for IP | Pro 80 and Duo Evo Plus 8 qt | IP Pro 80 8QT, Duo Evo Plus 8Qt | 10 pieces | Food-grade silicone | 9.4 |
| Pnltae 10PCS Replacement Parts for Instant Pot | Pro and Duo Evo Plus 6 qt | IP-Pro 60, IP-Pro Plus 60, Duo Evo Plus 60 | 10 pieces | 9.3 | |
| Pnltae 11PCS Replacement Parts for Instant Pot | new version Duo 6 qt | New version Duo 6QT family | 11 pieces | Silicone | 9.2 |
| SPNKMJUJ 11 PCS Instant Pot Accessories | Duo 5 and 6 qt | Duo 5, 6 Quart, Duo Plus 6 Quart | 11 pieces | 9.0 | |
| Havexerath 10 PCS Instantpot Replacement Parts | Duo and Duo Plus 8 qt | Duo 8 Qt, Duo Plus 8 Quart | 10 pieces | 8.9 | |
| Pnltae Replacement Parts for Instant Pot Old | old version Duo 6 qt | Old version Duo 5 and 6 qt | 11 pieces | 8.8 | |
| Pnltae Replacement Parts for Instant Pot RIO | Rio and Ultra 6 qt | Rio 6Qt, Ultra 6QT, new version Duo 6QT | 11 pieces | Silicone | 8.5 |
How to read the comparison in practice
Start with the fit column and remove every kit that does not name your exact model code. That separates the 8 qt Pro kit, the 6 qt Pro family kit, the new version Duo kits, the old version kit and the Duo 5 and 6 qt kit with two rings.
Next compare what is inside the box. Some include a condensation collector cup, some include a shroud bracket, and some include more gaskets, caps or O rings.
Those differences decide whether you order extras separately.
How we compared these instant pot duo replacement parts
We compared model lists, part counts and included pieces for each kit. Sealing rings, steam release valves, float valves, gaskets, anti-block shields and condensation collector cups were checked against each title and spec list.
We also checked size and version labels such as 6Qt, 8Qt, old version and new version. Duo lids changed across generations, so a part for a new version Duo may not fit an old version Duo at the same capacity.
We looked at spare small parts and sealing ring design notes, including two keel lines in several Pnltae kits and kits with two sealing rings. A ring that seats securely on the lid is central to holding pressure, and spare gaskets or caps help when a small piece is lost during cleaning.
We separated Pro and Duo Evo Plus models from standard Duo models, because they use different model codes and kit lists. IP-Pro 60, IP-Pro Plus 60, Duo Evo Plus 60, IP Pro 80 and Duo Evo Plus 8Qt do not share the same kits as Duo 60 or Duo Plus 60.
What size Duo do you have, and how do you check it?
Your cooker size is the first filter. The size is printed on the model code and on the lid, and it sets the sealing ring size you need.
6 qt Duo models
Most 6 qt kits include a 6Qt sealing ring. Check whether your model is a standard Duo, Duo Plus, Duo Nova, Ultra or Rio, because valve and handle shapes differ.
8 qt Duo models
An 8 qt kit uses a larger sealing ring for the bigger lid. Do not stretch a 6 qt ring onto an 8 qt lid, as it will not seat with even pressure.
5 qt Duo models
Duo 5 kits are made for the smaller lid. Confirm that the float valve and anti-block shield match the 5 qt lid shape before you order.
How to find the code on your cooker
Look for the model code on the back or base of the cooker and copy it exactly, including numbers and letters such as IP-DUO60 or IP-DUO50. That code tells you capacity and family, and it is the code to match against each kit list.
If the code is worn, compare lid shape and valve appearance with the kit description.
Is your Duo an old version or a new version?
Old version and new version Duo lids can look close but use different steam release handles and valve parts. That difference is noted in two kits here, and it is a common reason a correct size kit still will not fit.
Old version Duo 5 and 6 qt
Choose the Pnltae old version kit if your lid matches the old design. Compare the steam release handle shape with photos of your own lid, not with the cooker body.
New version Duo and Duo Plus 6 qt
Choose a new version kit for Duo 60, Duo Plus 60, Duo Nova, Rio, Duo Gourmet or Ultra 6 qt models. The sealing ring may look the same, but valve parts are made for the newer lid.
Pro and Duo Evo Plus models
Pro 60, Pro Plus 60 and Duo Evo Plus 60 use their own kit, and Pro 80 and Duo Evo Plus 8Qt use another. Those models are not standard Duo models, so check the full model name before ordering.
Which parts cause most Duo leaks and pressure faults?
A leak at the rim usually points to the sealing ring. When it stretches or cracks, steam escapes and the cooker may never reach pressure.
A float valve that will not rise points to the float valve, its gasket or the anti-block shield. Food residue can clog the shield, and a worn gasket can let pressure escape around the pin.
A steam release valve that leaks or sticks is another common fault. It controls venting at the end of cooking, so a worn valve can hiss during cooking or vent too slowly.
Condensation collector cups sit on the back of the cooker and catch water that drips from the lid. A cracked cup can drip onto the counter, so kits that include a cup solve a fault that seal-only kits miss.
Which small parts to check first when a fault repeats
Check float valve gaskets and small O rings before you replace the whole lid, because those parts are small and easy to damage during cleaning. A nicked gasket can let pressure escape around the pin, even when the main sealing ring looks fine.
Kits with three gaskets, caps or two sealing rings give you a direct way to test that theory.
How do instant pot duo replacement parts compare with inner pots and cords?
Lid parts, inner pots and cords fix different faults. A sealing ring kit will not repair a warped inner pot, and a new inner pot will not fix a leaking float valve.
When you need lid parts
Buy a seal and valve kit when steam leaks at the rim, the float valve sticks, or venting is slow. Those symptoms match worn sealing rings, valves, gaskets and anti-block shields.
When you need an inner pot or insert
Buy an inner pot or insert when the pot is warped, scratched through or will not sit level. Match capacity and base shape exactly, and see our best pressure cooker inner pot replacement guide for sizing help.
When you need a cord
Buy a replacement cord only when power is the fault. If the cooker will not turn on and the outlet works, check the cord and plug first.
Our Is It Better to Buy an Air Fryer or an Instant Pot? guide helps you weigh a new cooker against a repair.
How do you fit and care for new Duo parts?
Fit the sealing ring so it sits flat on the lid with no twists. A twisted ring leaves a gap, and steam will find that gap as pressure builds.
Seat the float valve and its gasket so the pin moves up and down freely. The pin should rise when pressure builds and drop when you vent.
Wash the anti-block shield and valves after each use, since food residue builds up fast. Let parts dry fully before storing the lid, so moisture does not sit on gaskets.
Inspect the sealing ring at each use. Replace it when cracked, stretched or holding food odor after washing.
Havexerath says its food-grade silicone resists odor and stains, and Pnltae says keel lines help the ring stay fixed.
Keeping spare parts ready without cluttering the kitchen
Store spare gaskets, caps and O rings with the lid they belong to, in a small dry container, so you do not mix 6 qt and 8 qt parts. Label the container with the model code, because a spare from a new version kit may not fit an old version lid.
What if the part still does not fit?
Stop and compare lid shape, not just cooker size. Old version and new version Duo lids differ in the steam release handle, and Pro models differ from standard Duo models.
Check the model code on the back of the cooker and match it letter by letter with the kit fit list. IP-DUO60, IP-Pro 60 and IP-Duo Evo Plus 60 are different models, even though all three are 6 qt.
If the valve shape does not match, do not force it. A forced valve can leak under pressure or stick during venting.
Return the kit and choose the version made for your lid generation.
For other brands, our presto pressure cooker parts 409a guide shows how to read a model stamp, and our best cosori pressure cooker replacement parts guide covers a different brand family with the same fit-first approach.
Verdict: best instant pot duo replacement parts for your model
Pick the Havexerath 10Pcs kit for 8 qt Pro or Duo Evo Plus models, the Pnltae 10PCS kit for Pro and Duo Evo Plus 6 qt models, and the Pnltae 11PCS kit for new version Duo 6 qt models. Pick the Pnltae old version kit for old version Duo lids.
Pick the SPNKMJUJ 11 PCS kit for Duo 5 and 6 qt owners who want two sealing rings, the Havexerath 10 PCS kit for Duo and Duo Plus 8 qt models, and the Pnltae RIO kit for Rio and Ultra 6 qt models.
Match your model code and lid version before you order, and keep spare gaskets with the cooker. That one check will save more time than any other buying step.
Our top 3 picks at a glance
-
1
Best for Pro 80 and Duo Evo Plus 8 qtHavexerath 10Pcs Instantpot Replacement Parts for IP
9.4/10 our score
See it on Amazon -
2
Best for Pro and Duo Evo Plus 6 qtPnltae 10PCS Replacement Parts for Instant Pot
9.3/10 our score
See it on Amazon -
3
Best for new version Duo 6 qtPnltae 11PCS Replacement Parts for Instant Pot
9.2/10 our score
See it on Amazon
Frequently asked questions
What are the best instant pot duo replacement parts to buy first?
Start with the sealing ring, steam release valve, float valve and anti-block shield. Those parts control sealing and pressure release, so worn examples often cause leaks or a float valve that will not rise.
Buy a kit sized for your exact Duo model and version, and keep spare gaskets and O rings for the small valve parts.
How do I know which size sealing ring I need?
Match the ring to your cooker size, such as 6 qt or 8 qt, and to your model family. A 6 qt ring will not seat correctly on an 8 qt lid, and Pro models can use different valve parts from standard Duo models.
Check the model code on the back of the cooker and compare the lid shape before you order.
Do I need an instant pot duo replacement cord?
You need a replacement cord only when the cord or plug is damaged or will not power the cooker. Most Duo seal and valve problems come from worn lid parts, not the cord.
If you do need a cord, match the plug type, voltage and cooker model exactly, and stop using the cooker if the cord is frayed or overheats.
Can I use an instant pot duo inner pot from another model?
Only when the inner pot size and shape match your cooker exactly. Inner pots are sized by capacity and base shape, so a pot from a different model may sit too high, too low or off center.
Measure the base diameter and height, and confirm the model list before you buy a replacement insert or inner pot.
When should I replace the sealing ring and valves?
Replace a sealing ring when it is cracked, stretched, stained with odor or will not hold a seal, and replace valves when they stick, leak or do not move freely. Havexerath suggests replacing the sealing ring every 18 to 24 months as routine maintenance.
Inspect the parts at each use rather than relying on the calendar alone.
About this guide: Our look at instant pot duo replacement parts draws on maker specs, materials and what owners report. See how we research.



